ALL prices listed reflect a discount for cash transactions,
add 4% for credit/debit cards.
Shipping on handguns will be a flat $25 each unless otherwise indicated.
I will combine shipping on multiple purchases.
add 4% for credit/debit cards.
Shipping on handguns will be a flat $25 each unless otherwise indicated.
I will combine shipping on multiple purchases.
Click on pictures for a larger image
$
|
|
AMERICAN TACTICAL OMNI HYBRID P4 PISTOL 5.56 X 45MM
PURE POLYMER PERFORMANCE PISTOL!
Our OMNI HYBRID P4 features a fully-patented metal reinforced polymer upper receiver along with a fully-patented metal reinforced polymer lower receiver. The Omni Hybrid lower features a patented hammer and trigger pin retainment system, preventing movement from the hammer and trigger pin during firing. The Omni Hybrid also features our patented over-molded metal inserts, which reinforce the buffer tube housing and rear takedown pin as well as reinforce the front take down pins. This allows for metal-on-metal contact with both the buffer tube as well as the rear takedown pin thus increasing strength and durability from recoil and consistent firing.
The P4 also features a revolutionary Nano Composite Parts Kit. This kit includes the hammer, trigger, disconnector, takedown pins, safety selector, magazine release and detents all made from nano composite material that is just as strong as metal components but at only 1/2 the weight.
Omni Hybrid P4 Features:
- Patented Omni Hybrid Upper Receiver with Front & Rear Metal Inserts
- Patented Omni Hybrid Lower Receiver with Front & Rear Metal Inserts
- Nano Composite Parts Kit
- 7.5" 1:7 Twist Nitride M4 5.56 x 45mm Barrel
- 7" Keymod Free Float Rail
- Low Profile Gas Block
- Standard AR Pistol Buffer Tube for use with most Braces
- 30 Round Magazine
Assembled in Summerville, SC by American Tactical!
PURE POLYMER PERFORMANCE PISTOL!
Our OMNI HYBRID P4 features a fully-patented metal reinforced polymer upper receiver along with a fully-patented metal reinforced polymer lower receiver. The Omni Hybrid lower features a patented hammer and trigger pin retainment system, preventing movement from the hammer and trigger pin during firing. The Omni Hybrid also features our patented over-molded metal inserts, which reinforce the buffer tube housing and rear takedown pin as well as reinforce the front take down pins. This allows for metal-on-metal contact with both the buffer tube as well as the rear takedown pin thus increasing strength and durability from recoil and consistent firing.
The P4 also features a revolutionary Nano Composite Parts Kit. This kit includes the hammer, trigger, disconnector, takedown pins, safety selector, magazine release and detents all made from nano composite material that is just as strong as metal components but at only 1/2 the weight.
Omni Hybrid P4 Features:
- Patented Omni Hybrid Upper Receiver with Front & Rear Metal Inserts
- Patented Omni Hybrid Lower Receiver with Front & Rear Metal Inserts
- Nano Composite Parts Kit
- 7.5" 1:7 Twist Nitride M4 5.56 x 45mm Barrel
- 7" Keymod Free Float Rail
- Low Profile Gas Block
- Standard AR Pistol Buffer Tube for use with most Braces
- 30 Round Magazine
Assembled in Summerville, SC by American Tactical!
AMERICAN TACTICAL OMNI HYBRID P4 PISTOL, 5.56 X 45MM
Same specifications as above (without Sig Brace) in FDE
$
|
|
AMERICAN TACTICAL OMNI HYBRID P4 Pistol, 5.56 x 45MM
Same Specifications as above with a Blade Brace
$
|
|
|
|
$
|
ATI BULL-DOG 12GA BULLPUP SHOTGUN BLACK 5 RND MAGAZINENEW FOR 2020!
American Tactical would like to introduce our latest import from PARS MFG in Turkey, THE BULL-DOG! This semi-automatic 12GA shotgun's new age look and modular design is a perfect fit for all types of gun owners. From the quick acquisition flip up sights, 3" chamber and 3-piece choke tube set for our avid shot gun users, to the AR style charging handle, picatinny and MLOK rails for our tactical gun users. Also featuring an adjustable cheek rest and a picatinny cut out at the base of the magazine, this allows you to slide your spare full or empty magazine onto the bottom picatinny rail and use the magazine as a fore grip. With an easy access quick release button to change mags fast and efficiently. Caliber: 12GA 3" Chamber 5 round magazine with picatinny cut out 3-piece choke tube set AR style charging handle Flip up sights Adjustable Cheek Rest Picatinny & MLOK Rail 18.5" Barrel MSRP: $499.95 https://americantactical.us/6427/detail.html Limited Lifetime Warranty and Product Return Policy Please Click Link For Further Details: http://www.americantactical.us/warranty.html |
ATI OMNI HYBRID AR-15 .410GA SHOTGUN 18.5" BARREL 13" KEYMOD HANDGUARD 5RD MAGAZINE SGA, ATIGOMNI41LTD
Finally Available in 2017!
After years of development, American Tactical is proud to finally release the Omni Hybrid 410 semi-auto shotgun!
Built on our patented Omni Hybrid receiver, the Omni Hybrid 410 is a one of a kind shotgun wonder. Chambered for 2 1/2" .410ga shells, the Omni Hybrid 410 is a must have multi-purpose shotgun.
Featuring an 18.5" barrel with a custom 13" keymod rail, the Omni Hybrid 410 runs on a gas operated, short stroke balanced piston system.
Each Omni Hybrid 410 comes with one 5 round American Tactical made polymer magazine. Additional 5 round and 15 round magazine are available for seperate purchase. The Omni Hybrid 410 will only operate with the patent pending American Tactical polymer 410 magazine.
Every Omni Hybrid 410 is built on our patented Omni Hybrid lower receiver and can be converted to 5.56 or 300blk just by changing the upper receiver! Every Omni Hybrid 410 upper receiver is built to regular AR spec and can be installed on most mil-spec lower receivers!
Weight: 6.5lbs
BBL: 18.5"
Stock: M4
Rail: 13'' custom keymod
Mag: 5 round capacity
Optics on picture above are for demonstration purposes only, the shotgun is an optics ready flat top platform.
MSRP: $599.95
Assembled in Summerville, SC by American Tactical!
IMPORTANT:
The Omni Hybrid 410 shoutgun only works with 2 1/2" shotgun shells. Some manufacturers 2 1/2" shells are actually longer than 2 1/2" and may not operate in this gun. Please check the length of your 2 1/2" shells prior to attempting to fire them.
The Omni Hybrid 410 shotgun only fires 410 ga cartridges. Do not attempt to fire other calibers of ammunition through this firearm. Other cartridges such as 45LC or 45-70 will not operate with this firearm and may cause damage to the shotgun and harm to the operator if attempted.
Limited Lifetime Warranty and Product Return Policy Please Click Link For Further Details:
http://www.americantactical.us/warranty.html
After years of development, American Tactical is proud to finally release the Omni Hybrid 410 semi-auto shotgun!
Built on our patented Omni Hybrid receiver, the Omni Hybrid 410 is a one of a kind shotgun wonder. Chambered for 2 1/2" .410ga shells, the Omni Hybrid 410 is a must have multi-purpose shotgun.
Featuring an 18.5" barrel with a custom 13" keymod rail, the Omni Hybrid 410 runs on a gas operated, short stroke balanced piston system.
Each Omni Hybrid 410 comes with one 5 round American Tactical made polymer magazine. Additional 5 round and 15 round magazine are available for seperate purchase. The Omni Hybrid 410 will only operate with the patent pending American Tactical polymer 410 magazine.
Every Omni Hybrid 410 is built on our patented Omni Hybrid lower receiver and can be converted to 5.56 or 300blk just by changing the upper receiver! Every Omni Hybrid 410 upper receiver is built to regular AR spec and can be installed on most mil-spec lower receivers!
Weight: 6.5lbs
BBL: 18.5"
Stock: M4
Rail: 13'' custom keymod
Mag: 5 round capacity
Optics on picture above are for demonstration purposes only, the shotgun is an optics ready flat top platform.
MSRP: $599.95
Assembled in Summerville, SC by American Tactical!
IMPORTANT:
The Omni Hybrid 410 shoutgun only works with 2 1/2" shotgun shells. Some manufacturers 2 1/2" shells are actually longer than 2 1/2" and may not operate in this gun. Please check the length of your 2 1/2" shells prior to attempting to fire them.
The Omni Hybrid 410 shotgun only fires 410 ga cartridges. Do not attempt to fire other calibers of ammunition through this firearm. Other cartridges such as 45LC or 45-70 will not operate with this firearm and may cause damage to the shotgun and harm to the operator if attempted.
Limited Lifetime Warranty and Product Return Policy Please Click Link For Further Details:
http://www.americantactical.us/warranty.html
$
|
|
$
|
ATI MilSport P3P AR Platform Rifle, 5.56mm, 16" Barrel100% Made in the USA and Assembled in Summerville, SC by American Tactical!
Limited Lifetime Warranty and Product Return Policy Please Click Link For Further Details: http://www.americantactical.us/warranty.html Recommended Ammunition:
UPC Code: 819644025290 Frame/Material: Aluminum Upper And Lower Manufacturer: American Tactical Finish/Color: Black Manufacturer Part#: TSU22CABLK Item ID: ATIG15MS556MLP3P Capacity: 30 Round Model: Milsport P3P Action:Semi-Automatic Description: M4 Flat Top Carbine Type: Long Gun Safety: Manual Safety Caliber: .223 Remington/ 5.56 mm Barrel Length: 16" MSRP: $599.95 https://www.americantactical.us/6298/detail.html |
$
|
ATI Omni Hybrid MAXX 5.56/223 CarbineOur ALL NEW OMNI HYBRID MAXX features a fully-patented metal reinforced polymer upper receiver along with a fully-patented metal reinforced polymer lower receiver. The Omni Hybrid lower features a patented hammer and trigger pin retainment system, preventing movement from the hammer and trigger pin during firing. The Omni Hybrid also featured our patented over-molded metal insert, which reinforces the buffer tube housing and rear takedown pin. This allows for metal-on-metal contact with both the buffer tube as well as the rear takedown pin thus increasing strength and durability from recoil and consistent firing. In addition a magazine is now included with all Omni Hybrid MAXX rifles.
Omni Hybrid MAXX Polymer Upper Receiver with Metal Insert Omni Hybrid Polymer Lower Receiver with Metal Insert 16" 5.56 / .223 Black Nitride Coated Barrel Standard M4 Handguard Standard Profile Picatinny Rail Gas Block Six Position Roger Super Stock Includes One 30RD Magazine Flat Top, Optics Ready Limited Lifetime Warranty and Product Return Policy http://www.americantactical.us/5207/detail.html MSRP: $599.95 |
$
|
American Tactical MB3-R 12 Ga ShotgunATI S-BEAM 12 GA PUMP SHOTGUN WITH BLADE SIGHT 18.5" BBL RECEIVER RAIL
The MB3-R features a mounted picatinny rail for optics and a blade style front sight. UPC Code: 813393019784 Frame/Material: Metal Manufacturer: American Tactical Finish/Color: Black Manufacturer Part#: ATIGMB3R Item ID: ATIGMB3R Capacity: 5 + 1 Rounds Model: S-Beam Type of Barrel: Not Threaded Action:Pump Action Description: Riot Gun Type: Long Gun Safety: Trigger Gaurd Safety Size: 18.5" Sights: Bead Sight Caliber: 12 GA Subcategory: Tactical Shotguns Barrel Length: 18.5" MSRP: $214.95 https://www.americantactical.us/5519/detail.html |
$
|
American Tactical TAC-SX2 Semi Auto 12 Ga ShotgunItem #: ATIGTACSX2
UPC_Code: 813393016554 Description: ATA TAC-SX2 SEMI 12M/18.5CB B Manufacturer: American Tactical Imports Model #: TAC-SX2 Type: Shotgun Finish: Black Stock: Synthetic, Black Sights: Ft:Bead Rr:None Barrel Length: 18.5" Weight: 6.4 lbs Caliber: 12 Gauge Capacity: 5+1 Action: Semi-Automatic Chokes: Cylinder Bore Receiver: Blue Chamber: 3" MSRP: $379.95 http://www.americantactical.us/4948/detail.html Comes with Davidsons Guaranteed Lifetime Replacement |
$100.00
|
American Tactical Nomad Single Shot 20 Ga ShotgunATIG20NMD18
SPECIFICATIONS: Metal Finish: Blue Action: Single Shot Caliber: 20 Gauge Gauge: 20 Gauge Barrel Length: 18.5" Overall Length: 31.5" Capacity: 1 Stock: Black Synthetic Chamber: 3" |
$100.00
|
American Tactical Nomad Single Shot .410 ShotgunATIG410NMD26
UPC: 819644021605 Description: ATI NOMAD SNGSHT410GA 26B Brand: American Tactical Imports Model: Nomad Type: Shotgun: Single Shot Caliber: 410 Gauge Finish: Blue Action: Single Shot Stock: Black Synthetic Sight: Bead Barrel Length: 26 Overall Length: 41.5 Weight: 4.75lbs Capacity: 1 Receiver: Blue Chamber: 3 Butt Plate: Black Rubber |
$
|
American Tactical MilSport Aluminum Stripped Lower Receiver |
$
|
American Tactical OMNI Poly Lower AR15T-STK with Parts Kit Installed
Stock: M4 Color Finish: Matte Black $15 Shipping to your FFL |
$
|
American Tactical 1911 Military, .45 ACP, 8+1, 5" Barrel
Features:
Full Size Single Action Semi Automatic 7+1 Magazine Capacity Specs: Caliber: .45 ACP Height: 5.28 Inches Length: 8.46 Inches Weight: 37 Ounces Magazine Capacity: 8+1 Frame: Material: 4140 Steel Finish: Blued Color: Matte Black Slide: Material: 4140 Steel Finish: Blued Color: Matte Black Rear Military Serration Sights: Military Style Front Sight Military Style Rear Sight Grips: Mahogany Textured Pattern Barrel: Length: 5 Inches Material: 4140 Steel Finish: Steel Color: Steel Trigger: Material: Aluminum Design: Military Color: Matte Black MSRP: $499.95 http://www.americantactical.us/939/detail.html |
$
|
American Tactical 1911 GI, .45 ACP, 8+1, 4.25" Barrel
Features:
Compact Commander Size Single Action Semi Automatic 7+1 Magazine Capacity Specs: Caliber: .45 ACP Height: 5.28 Inches Length: 7.87 Inches Weight: 33.5 Ounces Magazine Capacity: 8+1 Frame: Material: 4140 Steel Finish: Blued Color: Matte Black Slide: Material: 4140 Steel Finish: Blued Color: Matte Black Rear Military Serration Sights: Military Style Front Sight Military Style Rear Sight Grips: Mahogany Textured Pattern Barrel: Length: 4.25 Inches Material: 4140 Steel Finish: Steel Color: Steel Trigger: Material: Aluminum Design: Military Color: Matte Black MSRP: $499.95 http://www.americantactical.us/940/detail.html |
$
|
American Tactical 1911 Titan, .45 ACP, 7+1, 3.125" Barrel
|
